top of page


IC95 In-Wall/In-Ceiling Loudspeaker
The new compact IC95 integrated loudspeaker system is based on the well proven proprietary 6,5-inch mid-woofer, also used in Miller & Kreisel studio monitor system MPS1620P and in-wall system IW95.
The mid-woofer in IC95 is a long time accepted key component in the Miller & Kreisel signature sound history, now appearing as the key component for the smallest and most compact format ever – to provide the real Miller & Kreisel sound.
IC95 present a new developed axial mounted 1” soft fabric dome tweeter, designed with swivel function to angle and optimize the on-axis response to the listening positions.
The mid-woofer in IC95 is a long time accepted key component in the Miller & Kreisel signature sound history, now appearing as the key component for the smallest and most compact format ever – to provide the real Miller & Kreisel sound.
IC95 present a new developed axial mounted 1” soft fabric dome tweeter, designed with swivel function to angle and optimize the on-axis response to the listening positions.

IW150T Tripole® In-Wall Speaker
The IW150T® is the In-Wall equivalent of the famous S150T Tripole® surround speakers. Incorporating the exact same drivers and crossover technology as the S150T sealed cabinet speaker, the IW150T® delivers uncompromising performance from a less obtrusive form factor.
Modern installations and new surround formats such as Dolby Atmos and DTS X are incorporating more and more surround channels. In-Wall (and In-Ceiling) installations allow you to expand to take full advantage of these new formats without the clutter of visible wires or speakers.
The Introduction of the IW150T Tripole ® Speaker means you can have the same M&K 150 Series Acoustic Performance from a completely invisible installation.
Modern installations and new surround formats such as Dolby Atmos and DTS X are incorporating more and more surround channels. In-Wall (and In-Ceiling) installations allow you to expand to take full advantage of these new formats without the clutter of visible wires or speakers.
The Introduction of the IW150T Tripole ® Speaker means you can have the same M&K 150 Series Acoustic Performance from a completely invisible installation.

IW150 In-Wall Speaker
This award winning design is the In-Wall equivalent of M&K Sound’s S150 Series used on a daily basis as the preferred monitoring tool in hundreds of professional film and music recording studios around the world and in thousands of serious home entertainment systems.
Can there be any better choice than the speakers on which your favorite movies and music were actually created?
Can there be any better choice than the speakers on which your favorite movies and music were actually created?

IW300 In-Wall Speaker
The IW300 features the same proprietary drivers and crossover as the famed Miller & Kreisel S300 Series. The unique design allows critical audio professionals to hear exactly what’s going on in the mix and listen for hours with no hint of fatigue.
This is the ultimate choice for the music and cinema enthusiast seeking the finest In-Wall speakers available.
This is the ultimate choice for the music and cinema enthusiast seeking the finest In-Wall speakers available.

IW95 In-Wall Speaker
As a direct descendent of M&K Sound’s standard-setting professional studio monitors, the highly versatile IW95 is built on a thick rock-solid steel baffle and uses serious steel mounting brackets.
The universal IW95 is suitable for any complex installation and deliver a seamless, holographic, three-dimensional listening experience.
The universal IW95 is suitable for any complex installation and deliver a seamless, holographic, three-dimensional listening experience.

IW950 In-Wall Speaker
The IW950 incorporates proprietary M&K Sound drive units and technologies drawn from the classic 950 Series.
Stable, smooth installation and the same sophisticated design philosophy developed for all M&K Sound speakers ensures even sound throughout any room with superior imaging, whether mounted In-Wall or In-Ceiling.
Stable, smooth installation and the same sophisticated design philosophy developed for all M&K Sound speakers ensures even sound throughout any room with superior imaging, whether mounted In-Wall or In-Ceiling.

IW5 In-Wall Speaker
Designed with the same richly detailed sound as the M&K Sound M Series. The IW5 is supplied with a slim round grille making it the optimal choice as the In-Ceiling solution.
The ultra compact IW5 is the invisible flush-mount speaker that delivers consistent sound quality across large spaces or multiple zones.
The ultra compact IW5 is the invisible flush-mount speaker that delivers consistent sound quality across large spaces or multiple zones.

C15S Custom Installation Sub
In our constant strive to be the BEST “go-to-speakers” for Home Cinema installations we have developed the real NO Compromise Bass machine.
Introducing the C15S Custom Install Subwoofer. Designed for custom installations
Bigger is better when it comes to bass. Falling between the X10 and X12 in total woofer area, the C15S is a no-compromise bass machine.
Designed for behind the screen installations the C15S is only 298mm deep, same as the S150.
Full 1″ MDF cabinet construction with full center brace with additional front to back braces for Ultra-rigid cabinet construction.
Included Bass Brace brackets for bolting down to the floor/stage for safety, security and increased vibration reduction.
Included Stacking Coupler for stacking multiple subwoofer for additional output.
Separate subwoofers and amplifiers increase thermal performance.
External amp – VA500 Blue tuned specifically for the C15S with 3 custom boundary compensation EQ´s.
The C15S builds on the technology of the X-Series and V-Series subwoofers and goes BIG. With output on par with the dual 10” X-10 subwoofer (without the advantages of Push-Pull) in a single driver enclosure, the C15S is designed to enhance custom and large installations.
Utilizing a specially tuned VA-500 amplifier, the entire system was custom designed from the ground up to reproduce the deepest notes at levels loud to be heard and felt.
Introducing the C15S Custom Install Subwoofer. Designed for custom installations
Bigger is better when it comes to bass. Falling between the X10 and X12 in total woofer area, the C15S is a no-compromise bass machine.
Designed for behind the screen installations the C15S is only 298mm deep, same as the S150.
Full 1″ MDF cabinet construction with full center brace with additional front to back braces for Ultra-rigid cabinet construction.
Included Bass Brace brackets for bolting down to the floor/stage for safety, security and increased vibration reduction.
Included Stacking Coupler for stacking multiple subwoofer for additional output.
Separate subwoofers and amplifiers increase thermal performance.
External amp – VA500 Blue tuned specifically for the C15S with 3 custom boundary compensation EQ´s.
The C15S builds on the technology of the X-Series and V-Series subwoofers and goes BIG. With output on par with the dual 10” X-10 subwoofer (without the advantages of Push-Pull) in a single driver enclosure, the C15S is designed to enhance custom and large installations.
Utilizing a specially tuned VA-500 amplifier, the entire system was custom designed from the ground up to reproduce the deepest notes at levels loud to be heard and felt.

IW85 In-Wall Speaker
Experience full-range, designer-friendly sound to rival many “audiophile” stand-alone speakers, in a compact package that integrates beautifully into walls or ceilings!
The versatile IW85 is superb in two-channel or surround applications and can be combined with any M&K Sound speakers for a seamless sonic timber match.
The versatile IW85 is superb in two-channel or surround applications and can be combined with any M&K Sound speakers for a seamless sonic timber match.

IW28S In-Wall Subwoofer
More than four decades of experience and insight have been applied to the design of this truly invisible subwoofer, based on high-performance 8” woofers specially developed for the M&K Sound V Series subwoofers and ingeniously adapted to meet the extreme demands of shallow, flush-mount installation while delivering the quantity and quality of deep bass that consumers and professionals expect from M&K Sound.
The specially tuned, ultra-fast, mass-loaded dual drivers employ aluminum shorting rings for minimal voice coil distortion at long excursion. Highly rigid paper pulp cones with high inner damping ensure stability at extreme levels and low resonance.
The ultra-linear solid ferrite magnet system provides effective dissipation of heat from the voice coil to prevent power compression from limiting the acoustic output of the system.
The drivers are installed in full contact with the front baffle and the rear of the box for ideal mechanical stability to minimize driver resonances that can occur due to the limited volume of an In-Wall enclosure.
The IW28s needs the VA500 Subwoofer Amplifier.
The specially tuned, ultra-fast, mass-loaded dual drivers employ aluminum shorting rings for minimal voice coil distortion at long excursion. Highly rigid paper pulp cones with high inner damping ensure stability at extreme levels and low resonance.
The ultra-linear solid ferrite magnet system provides effective dissipation of heat from the voice coil to prevent power compression from limiting the acoustic output of the system.
The drivers are installed in full contact with the front baffle and the rear of the box for ideal mechanical stability to minimize driver resonances that can occur due to the limited volume of an In-Wall enclosure.
The IW28s needs the VA500 Subwoofer Amplifier.

Miller & Kreisel® S300T Tripole® Speaker
M&K Sound invented the Tripole® speaker configuration to do what no conventional surround loudspeaker can do. The installation of side and/or rear mounted S300T’s enhances the solidity and pin-point placement of rear channel events such as fly-overs, voices, effects, music etc., as well as the realism of the ambient soundfield.
The S300T Tripole® with integral wall-mount bracket, employs the same front drivers and crossover technology as the S300, for a perfect acoustic match.
Independent, isolated side chambers house two 4” drivers per side for optimal surround coverage that rivals the huge array of speakers required in movie theaters.
The S300T Tripole® with integral wall-mount bracket, employs the same front drivers and crossover technology as the S300, for a perfect acoustic match.
Independent, isolated side chambers house two 4” drivers per side for optimal surround coverage that rivals the huge array of speakers required in movie theaters.

Miller & Kreisel® S300 Speaker
Destined to become the reference home entertainment speaker system, the S300 offers transparency and neutrality that surpasses far larger, more costly systems. More compact than any speaker capable of rendering such clarity and pinpoint detail, the ultra-smooth S300 ensures unsurpassed, effortless realism even in very large rooms.
While a dedicated left/right mirror-image pair provides optimal imaging for two- channel sources, the use of an identical third speaker for center channel duties guarantees a seamless, consistent sound field in all dimensions.
The S300 is the ultimate demonstration of our dedication to innovation and quality.
While a dedicated left/right mirror-image pair provides optimal imaging for two- channel sources, the use of an identical third speaker for center channel duties guarantees a seamless, consistent sound field in all dimensions.
The S300 is the ultimate demonstration of our dedication to innovation and quality.
bottom of page